Buy Thai Magic Mushrooms Grow Kit GetMagic Online

Please find out more about storage, directions, dos and don’ts, picking and harvesting, and soaking. This will help you grow Thai Magic Mushrooms Grow Kit GetMagic effectively and produce a large quantity of potent mushrooms.

What’s in the box?	You need
1x substrate container with 1200 cc / ml mycelium, perlite and vermiculite1x grow bag with air filterPaperclip(s)	Misting Bottle: Misting is needed for the humidity levelPotable water for misting and soaking, warm water for soakingClean environment: Work clean to give other fungi and bacteria (microorganisms) no chance to contaminate.

We recommend using

• Surgical gloves
• Facemask
• Disinfectant for hands
• Disinfectant for surfaces
• Soaking Bag
• Thermometer
• Thermo mat (when room temperature drops below 18°C)

How do I store Thai Magic Mushrooms Grow Kit GetMagic?

Do not store your grow kit longer than 2–3 weeks

We recommend that you begin growing your mushroom kit immediately. If you wish to grow later, do not keep your grow kit for more than 2-3 weeks after it was manufactured.

Store in a cool place

Always keep the mushroom growing kit in the fridge (2°C to 4°C). The manufacture date and the two digits of the week number are printed on the cardboard box.

Avoid contamination

Make sure your refrigerator is clean and clear of bacteria, yeasts, and other contaminants. To be safe, place the culture kit in a clean plastic bag and carefully seal it.

Instructions

1. Wash your hands thoroughly and clean the outside of the grow kit with a dry cloth. Remove the lid and save it for step 2
2. Fill the growkit to the edge with lukewarm water (20°C), put the lid back on the growkit, and let it soak for 5 minutes.
   
   Important: never soak the growkit for more than 1 hour!
3. Remove the lid from the grow kit and drain the water well. Let the growkit drain for 10 seconds.
4. Place the growkit in the growbag and fill the growbag with a cup (200–250 ml) of lukewarm water (20°C). Then fold the top of the bag and close it with 2 paperclips.
5. Place the growkit in a place with an average room temperature of 20–25 °C. Make sure that the growkit is not in direct sunlight, not under a lamp, and not near a radiator/heat source.
   Important: The bag must remain closed until the first pinheads form. Until then, the CO2 content and humidity inside the bag should be as high as possible.
6. When the first pinheads* are visible, let some fresh air into the growbag on a daily basis (for a few minutes) and then moisten the growkit with a misting bottle.
   *Pinheads are the first visible forms of tiny mushroom caps. It can take 10 to 20 days for the first pinheads to be visible.
7. The mushrooms can be harvested just before the membranes on the bottom of the cap open up. While harvesting, gently grasp the stem and turn it left/right. When the mushroom becomes loose, pull it out as carefully as possible. Important: The mushroom must be completely removed so that there is room for a new one.
8. Congratulations! The harvest is complete. It is now possible to grow a new flush of mushrooms by repeating steps 1 to 7 again.

Read the following do’s and don’ts for a successful growth.

Despite the fact that mushroom grow kits are simple to use and relatively foolproof, we have summarized the most significant elements for you. Temperature, light, humidity, the first mushrooms, and the growth cycle are only a few examples.

Temperature

The mycelium in the magic mushroom kit simply needs light to ‘understand’ when it reaches the surface. Only then will the mushrooms emerge. A few hours of fluorescent/artificial lighting or indirect sunlight per day is sufficient. Direct sunlight damages mycelium, so keep it away from the grow kit.

Light

The mycelium in the magic mushroom kit simply needs light to ‘understand’ when it reaches the surface. Only then will the mushrooms emerge. A few hours of fluorescent/artificial lighting or indirect sunlight per day is sufficient. Direct sunlight damages mycelium, so keep it away from the grow kit.

Humidity

Misting begins on the day the first pins appear. To open the grow bag, remove the paperclip. Spray once on each edge of the bag, rather than directly on the cake itself. So you mist once a day with four sprays. Misting also allows new oxygen to enter the bag. After misting, use the paperclip to shut the bag again.

Frequent air exchange (FAE)

Keep the grow bag tightly sealed until the first pins appear; CO2 levels should be as high as possible to promote pinning. Following the pinning stage, open the bag 1-2 times per day to let fresh air in. Open and close the bag, removing the air and letting in fresh air.

The first shrooms!

If the growing conditions are excellent, the first small mushrooms (pins) should appear within 10 to 20 days. The strain also has an impact on this. Some Cubensis strains mature more slowly than others. It may take another week for it to mature. A whole development cycle can take up to 4–5 weeks.

Flushes

The mushrooms appear in clusters. A flush is a type of growth like this. A kit can provide more than one flush. The first two flushes are the most significant. More flushes will follow, each one smaller than the last.

Picking and Harvesting

Pick mushrooms when the veil between the hat and the stem is about to tear or has recently torn. If you wait too long, the mushrooms will release their spores. Pick only the ripe mushrooms and leave the rest to grow. The alternative is to remove all of the mushrooms and start a new flush. How to Select Mushrooms

• Use surgical gloves or disinfect your hands, wrists and arms. 
• Remove the mushrooms from the cake by taking hold of the base of the mushroom between the thumb and index finger.
• Rotating your hand clockwise slowly, until the mushroom lets go.

Do not remove the mushrooms. This would endanger the mycelium and possibly kill it. Pick the tiny mushrooms and pins once you’ve picked the majority of the larger mushrooms.

Mushrooms that grow from the sides

Mushrooms thrive where there is enough light and little penetrating resistance. Because the sun shines on the sides of the cake, mushrooms may grow there as well. You have several options:

• Darken the sides of the kit by putting it in the cardboard box.
• Spray the top soil a bit to stimulate more growth on the top
• Do nothing and let them grow

Soaking

After you’ve gathered all of the mushrooms, you’ll need to prepare the kit for the next flush. Disinfect your hands or use gloves; remove the grow box from the grow bag.

• Fill the container with lukewarm water (20°C)
• Take the lid use it to close the container.
• Let it soak for 5 – 20 minutes.
• Remove the lid, and drain the water
• Place the growkit in the growbag and fill the growbag with a cup (200-250ml) of lukewarm water (20°C)

This is known as the soaking process. Water will now be absorbed by the cake, preparing it for the next flush. You can hang the grow bag with micronfilter upside down to dry while it is soaking. After each flush, many growers like to utilize new and unused grow bags.

Next Flush

To proceed, repeat steps 2 through 7 as you did when you originally started the process. A new flush will occur a few days later. A grow kit can provide at least two flushes. The initial flush is frequently the largest.

The End

When no more mushrooms grow from your grow kit after the second flush for at least 5-6 weeks, or when the grow kit turns green, red, grey, or yellow, it can be discarded.

The change in hue indicates that the grow kit has been contaminated with another fungus or bacteria. The mushroom grow kit will no longer produce mushrooms, so dispose of it outside or in your garden.

Spores

When you pick the mushrooms too late, they will release their spores. The spores cause the cake and mushrooms to turn black/purple. This isn’t a major deal; it just doesn’t look very good. When mushrooms release spores, they begin to decay and the active compounds degrade. Mushroom potency will be lowered.

Thai Strain information

• Origin: Thailand
• Cap: 20-50 mm, orange Brow to Red brown when the mushroom matures,
• Stem: 40 -125 mm, medium ot large in size, bruises green blue when touched
• Spores: Dark purple brown, 11.5–17 x 8–11 µm, subellipsoid, basidia 4-spored
• Substrate: PF Tek and BRF, Rye grain, Straw and Dung

About GetMagic Grow kits

GetMagic mushroom grow kits contain everything you need for growing magic mushrooms at home;

• a grow bag
• ready to grow mushroom substrate
• and clips to close the bag

The GetMagic grow kits recreate the cool of multilayer magic mushroom grow kits from the past. The mycelium is entirely colonized, with perlite underneath and a layer of vermiculite on top.

These layers keep the equipment wet and make it easy to maintain ideal conditions. The GetMagic grow kit will need your help, love, and positive energies to reach its full potential.

Simply add water, and you will be rewarded with a large amount of mushrooms in 2-4 weeks. This kit is designed only for small-scale home use. For human consumption only. Use just for spore reproduction and research.

Be sensible

Check out the responsible use page for more information on do’s and don’ts.

Productcode	MCS.GKMYC.001-THAI-1200
Weight (KG)	1.0000
On Sale?	No
Alternative product:	No
Grow Kit type	No
Difficulty	Easy
Size	Extra Large
Species	Psilocybe cubensis
Origin	Netherlands
Potency	Average / High
Optimum cultivation temperature	24ºC
Yield (from)	200 grams
Yield (to)	800 gram
Water Spray Needed	Yes